Rooms and disrupted areas
Nationwide
Our fresh-start team pumps out basement water, removes contaminated debris, and dries floors, walls, framing, and contents below grade.
Signs to look for
As the home starts over, if you notice any of these problems, call us before water has more time to spread into nearby materials.
On the way back to normal, dripping, trickling or a faint sloshing from the stairwell means water is either arriving or being disturbed. For a clean slate, that sound is your cue to stop and call instead of walk down.
To put this behind you, look at the bottom step from where you are standing, then look again ten minutes later.
For a clean slate, water on a basement slab evaporates into the only air available.
For a clean slate, rain driven flooding points outside first: grading that slopes toward the house, a downspout dumping at the foundation, or a window well filling up.
On the way back to normal, with no rain, the water came from inside.
For a clean slate, a single wet wall usually means one entry point, often the cove joint where the foundation wall meets the slab.
What happens
Our fresh-start team adjusts the work to what ended up wet, how far the water traveled, and which materials can be saved.
As the home starts over, before the first hose runs we walk the perimeter, check the window wells, the cove joint and the floor drain, and name the likely entry point.
For a clean slate, submersible pumps handle the volume and truck mounted extractors take the rest. For a clean slate, deep water, lift height and hose routing are pump out work, which we reset plan and price openly.
On the way back to normal, a dry looking slab is not a dry basement.
As the home starts over, everything comes up onto blocks or out of the room.
To put this behind you, bare block and slab dry differently from framed and finished walls.
To put this behind you, carpet padding, saturated cardboard, particleboard shelving and pulped paper goods leave early.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
What comes next
As the home starts over, here is how we usually handle flooded basement removal near the United States.
For a clean slate, tell us how deep it looks, whether it rained, and whether the space is finished.
Your callTo put this behind you, we walk you through killing power to the basement from the upstairs panel if that is safe to do.
+5 minutesAs the home starts over, we pick the hose and equipment route while the crew is moving, using a bulkhead, stairwell or window well.
+15 minutesFor a clean slate, power to the area is confirmed off before anyone enters.
On arrivalOn the way back to normal, pumps run first on anything deeper than a couple of inches. To put this behind you, where the water is deep and the soil outside is saturated, it comes down in stages instead of all at once.
First hour on siteAs the home starts over, stored items come up or out while extraction pulls water from carpet, pad and wall bases.
Same dayAs the home starts over, padding, soaked cardboard and failed particleboard go to the truck.
Same day or nextUnderstanding the cost
As the home starts over, we explain the recommended work and price before you approve the job. As the home starts over, these examples show what may change the estimate.
| Common situation | What the estimate may include | Typical range |
|---|---|---|
| Unfinished basement, a few inches of clean water, pump out plus extraction and drying | For a clean slate, national estimate. On the way back to normal, bare slab and block, contents minimal, four to seven days of equipment. | $1,500 to $4,000 |
| Unfinished basement with a foot or more of water, removal, cleaning and drying | For a clean slate, national estimate. To put this behind you, adds staged pumping, contents handling and a cleaning stage before drying. | $3,500 to $9,000 |
| Finished basement with a foot or more of standing water | For a clean slate, national estimate. For a clean slate, carpet and pad out, walls metered and mostly dried in place, contents sorted. | $5,000 to $15,000 |
| Lower level of a two story home taken back to the studs after dirty water | For a clean slate, national estimate for removal, disposal, cleaning and full structural drying of a lower level. | $10,000 to $30,000 |
| Basement work priced by affected area, clean water | For a clean slate, national estimate covering extraction, drying and light cleaning of the affected footprint. | $3 to $7 per square foot |
| After hours or overnight dispatch charge | On the way back to normal, added once for a night, weekend or holiday start. On the way back to normal, it does not repeat on later visits. | $100 to $400 nationally |
Depth of water and floor area covered
To put this behind you, depth drives the pumping stage and area drives everything after it.
Finished or unfinished space
To put this behind you, bare block and slab are the cheap case.
How many hours passed before the call
To put this behind you, same day work is mostly extraction and drying.
What the water actually was
A clean supply line break is the low end. Groundwater carrying soil, or anything from a drain, adds cleaning and disposal to the reset plan.
Contents volume on the floor
On the way back to normal, a basement used for storage takes hours of lifting, listing and sorting before extraction can even start.
Drying days and equipment count
On the way back to normal, air movers run roughly $25 to $40 per unit per day and Professional dehumidifiers roughly $70 to $110 per unit per day.
Why timing matters
To put this behind you, water can keep moving into nearby materials even when the surface looks dry.
For a clean slate, photographs, records and keepsakes usually live on a basement floor.
As the home starts over, boxes collapse and their contents end up on the floor in a pile.
To put this behind you, a supply line, a window well or a saturated yard does not stop because you closed the door.
On the way back to normal, below grade air is still, cool and humid, which is the worst combination.
Helpful service information
For a clean slate, start with the short explanation. To put this behind you, open a card if you want a little more detail.
From outside, the usual causes are grading that slopes toward the house and a downspout discharging at the foundation.
Basements flood for a short list of reasons, and knowing which one you have changes the whole job.
A truck mounted extractor pulls far more water out of carpet and pad than any rental machine, and a submersible pump moves the bulk fast.
The water you can see is the smallest part of a flooded basement. A truck mounted extractor pulls far more water out of carpet and pad than any rental machine, and a submersible pump moves the bulk fast.
On the way back to normal, there is no natural ventilation, the air is cool, and concrete block stores water in its cores and gives it back for days.
As the home starts over, drying a basement is not the same as drying a bedroom. On the way back to normal, there is no natural ventilation, the air is cool, and concrete block stores water in its cores and gives it back for days.
Help near you
Start with your area below, or call (877) 289-0037 and describe what set this off.
You may also need
Our fresh-start team pumps standing water from basements, removes remaining moisture, and prepares floors and walls for controlled structural drying.
Get a Quote: (877) 289-0037Our fresh-start team uses pumps to remove deep standing water without delay, followed by detailed extraction and moisture checks around disrupted areas.
Get a Quote: (877) 289-0037Our fresh-start team removes water while protecting finished walls, flooring, furniture, and built-ins, then dries hidden basement materials.
Get a Quote: (877) 289-0037Our fresh-start team removes standing water from floors and low areas, then checks nearby materials for moisture out of sight and begins drying.
Get a Quote: (877) 289-0037Our fresh-start team pumps out water after sump-pump failure, cleans the disrupted area, and dries basement or crawl-space materials.
Get a Quote: (877) 289-0037Our fresh-start team pumps out groundwater seepage, maps the wet area, and dries basement or crawl-space materials after the entry is controlled.
Get a Quote: (877) 289-0037Our fresh-start team removes water entering through foundation walls or floors and dries affected basement materials while the entry source is addressed.
Get a Quote: (877) 289-0037Our fresh-start team uses air movement, dehumidification, and moisture monitoring to dry framing and building materials beyond the visible surface.
Get a Quote: (877) 289-0037Common questions
On the way back to normal, stay out of the water and call. For a clean slate, if the upstairs panel is dry and reachable, kill power to the basement circuits.
For a clean slate, not until power to the area is off. As the home starts over, a basement holds the panel, the furnace and dozens of outlets near floor level.
For a clean slate, then the water came from inside the house. For a clean slate, the three common culprits are a water heater at the end of its life, a burst washing machine hose, and a split supply line.
As the home starts over, a shop vacuum handles about an inch of clean water on bare slab.
On the way back to normal, nationally, an unfinished basement with a few inches runs about $1,500 to $4,000 including drying.
As the home starts over, water removal is usually finished the day we start. To put this behind you, drying a below grade space commonly takes four to seven days, longer than the three to five days an upstairs room needs.
To put this behind you, solid wood, metal, glass, plastics and most sealed contents clean up fine. As the home starts over, cardboard, paper goods, particleboard shelving and carpet padding rarely come back.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
Areas we serve
As the home starts over, identify your state to reach restoration assessment, extraction, cleanup, and drying service in your area.
View the area on Google Maps